Panasonic DMCFZ100K Operating Instructions Manual page 170

Press [MENU/SET].
•
If you set [TEXT STAMP] for a picture with a picture size larger than [
size will become smaller as shown below.
Aspect ratio setting
•
When selecting [
press [MENU/SET] and proceed to step 7.
Press 3 to select [YES] and then press [MENU/
SET].
•
The message [SAVE NEW PICTURES?] appears if the picture
was recorded with a picture size [
Press [‚] to return to the menu screen.
¢The menu screen is automatically restored when [MULTI] is selected.
•
Press [MENU/SET] to close the menu.
Note
•
When you print pictures stamped with text, the date will be printed over the stamped text if you
specify printing of the date at the photo shop or on the printer.
•
You can set up to 100 pictures at one time in [MULTI].
•
The picture quality may deteriorate when text stamping is carried out.
•
Depending on the printer being used, some characters may be cut at printing. Check before
printing.
•
When text is stamped onto the [
•
Text and dates cannot be stamped on the pictures in the following cases.
–
Motion pictures
–
Pictures recorded without setting the clock and title
–
Pictures that were previously stamped with [TEXT STAMP]
–
Pictures taken with [
–
Pictures recorded with other equipment
Advanced (Playback)
X
Y
W
] or [ ], press 3 to select [YES] for stamping [AGE], and then
] or less.
]/[ ]/[
], [ ] or [ ]
- 170 -
Picture size
/ /
/ /
/ /
/ /
¢
]/[ ] pictures, it is difficult to read it.
], the picture
>
/
>
/
>
/
>
/