Rotate the zoom lever towards [Z] (T).
1k>2k>4k>8k>16k
•
When you rotate the zoom lever towards [L] (W) after
enlarging the picture, the magnification becomes lower.
•
When you change the magnification, the zoom position
indication A appears for about 1 second, and the position of
the enlarged section can be moved by pressing 3/4/2/1.
•
The more a picture is enlarged, the more its quality
deteriorates.
•
When you move the position to be displayed, the zoom
position indication appears for about 1 second.
•
Focus point will be enlarged when [FOCUS] is pressed.
(P63)
∫ Switching the displayed image while maintaining the Playback Zoom
Rotating the rear dial to select the picture during Playback Zoom.
•
You can switch the displayed image while maintaining the same zoom magnification and zoom
position for the Playback Zoom.
Note
•
You can also delete the recording information etc. on the LCD monitor/Viewfinder during
Playback Zoom by pressing [DISPLAY].
•
If you want to save the enlarged picture, use the Cropping function.
•
The Playback Zoom may not operate if pictures have been recorded with other equipment.
•
The zoom magnification and the zoom position are cancelled when the camera is turned off
(including Sleep Mode).
•
The zoom position returns to the centre in the following images.
–
Images with different aspect ratios
–
Images with different numbers of recorded pixels
–
Images with a different rotation direction (when [ROTATE DISP.] is set to [ON])
•
Playback Zoom is not available during Motion Picture Playback.
Basic
Using the Playback Zoom
- 62 -
W
A
(P172)
T