Auto Registration - Panasonic DMCFZ100K Operating Instructions Manual

When [AUTO REGISTRATION] is set to [ON], the registration screen will display
automatically after taking a picture of a face that has a high number of appearances.
•
3 is the typically required number for the registration screen to display. (Taking pictures while
set to Burst, Auto Bracket, White Balance Bracket, Multi Film Bracket, or taking still pictures
while recording motion pictures are not counted)
•
It may be extremely hard to recognise only with [AUTO REGISTRATION], so register the face
images with [FACE RECOG.] in the [REC] Mode menu beforehand.
∫ Registering from the automatic registration screen
1
Press 3 to select [YES] and then press [MENU/SET].
•
If there are no registered persons, proceed to step
•
Selection screen is displayed again when [NO] is selected, and
when [YES] is selected with
set to [OFF].
2
Press 3/4 to select [NEW PERSON] or
[ADDITIONAL IMAGE] and then press [MENU/SET].
Item
[NEW PERSON]
[ADDITIONAL IMAGE]
•
After additionally registering or changing a face image, the screen returns automatically to
the recording screen.
3
Perform the operation in Step
person".
Note
•
If the registration screen will not display, it may display easier by recording in the same
conditions or with the same expressions.
•
If a face is not recognised even though it is registered, it will make the recognition easier by
registering the person again using the [FACE RECOG.] in the [REC] Mode menu in that
environment.
•
If the registration screen is displayed for a person that is already registered, it will make the
recognition easier by additionally registering.
•
It may make recognition harder when a picture recorded with flash is registered.
Advanced (Recording pictures)

Auto Registration

3 , [AUTO REGISTRATION] will be
Description of settings
•
A list of registered people is displayed when there are 6 people
already registered. Select the person to be replaced.
To additionally register a face image for a registered person.
Press 3/4/2/1 to select the person to whom you wish
add the picture, and then press [MENU/SET].
•
If 3 images have already been registered, the picture
replacement screen will appear. In this case, select the picture
you wish to replace.
6
and following in "Registering face image of new
- 126 -
3
.