Panasonic DMCFZ100K Operating Instructions Manual page 34

[HIGHLIGHT]
•
If there are any white saturated areas, we
recommend compensating the exposure towards
negative (P78) referring to the histogram
then taking the picture again. It may result in a better
quality picture.
•
There may be white saturated areas if the distance
between the camera and the subject is too close
when taking pictures with the flash.
If [HIGHLIGHT] is set to [ON] in this case, the area
directly illuminated by the photo flash will become white saturated and appear blinking in black
and white.
•
Highlighting does not work during Multi-Playback (P61), Calendar Search (P165), Playback
Zoom (P62), or Motion Picture Playback (P157).
[LENS RESUME]
•
MF position will be memorised in the following cases:
–
Turning the camera off
–
When the focus selector switch is switched to anything but [MF]
–
When switched to playback mode
•
Zoom position will be set all the way to wide when the [ZOOM RESUME] is set to [OFF].
•
When [MF RESUME] is set to [OFF], MF position will be the distance focused at the time of
recording in Manual Focus.
•
Depending on the recording conditions, the memorised MF positions and resumed MF
positions might be different.
Preparation
When the Auto Review function is activated or when playing back,
white saturated areas appear blinking in black and white.
[OFF]/[ON]
(P68)
It is possible to memorise the zoom position and the MF (manual
focus) position when the power is switched [OFF].
[ZOOM RESUME]:
It will automatically return to the zoom position when the power
was switched [OFF], next time you turn the power [ON].
[OFF]/[ON]
[MF RESUME]:
It will memorise the MF position set with the manual focus. It will
resume the memorised manual focus position when you return to
manual focus recording.
[OFF]/[ON]
- 34 -
[ON]
and
[OFF]