Table of Contents
Advertisement
Press Fn + Ctrl to simulate the enhanced keyboard's right Ctrl key.
Hotkeys
Fn + ESC
Fn + F1
Fn + F2
Fn + F3
Fn + F4
Fn + F5
Default resolution for simultaneous mode is set to WXGA (2048 × 1536).
If you connect an RGB (Monitor) that is not WXGA resolution, change it in
"Display Properties".
Fn + F6
Fn + F7
Fn + F8
Fn + F9
Fn + F10
Fn + F11
Fn + F12
Fn + Space
User's Manual
Volume Mute: Turns the volume on and off.
Instant Security: Enters screen saver mode and
blanks the screen. To restore your desktop, press
any key or use the TouchPad.
Power Save Modes: Displays the power save
modes and lets you change the power settings
Standby: This hot key switches the system to
Standby mode.
Hibernate: This hot key switches the system to
Hibernate mode.
Display Selection: Changes displays.
Brightness Down
Brightness Up
Wireless Device Controls: Pressing this hot key
allows you to switch between active wireless
devices if the wireless communication switch is
switched on.
TouchPad On/Off
Cursor Keypad On/Off: This hot key enables/
disables the embedded cursor keypad. See
chapter 3 for more information.
Numeric Keypad On/Off: This hot key enables/
disables the embedded numeric keypad. See
chapter 3 for more information.
Scroll Lock On/Off
Change Resolution: Cycles sequentially from
the current resolution to 800 × 600 to 2048 × 1536
and back again to the original resolution.
The Keyboard
5-3
Advertisement
Table of Contents
