1 In Start\Settings\Control Panel, select Performance and Maintenance,
then Administrative Tools. Select Computer Management, then choose
Storage and double-click Disk Management.
2 In the lower right-hand window, right-click Unallocated Disk Task.
3 Select Create Partition and follow the on-screen instructions
If Setup does not recognize your hard disk drive(s):
1 Turn off your PC and display, and disconnect all cables and
2 Remove the cover.
3 Check that your data cable connections and jumper settings
are correct. For instructions, refer to "Configuring Your Hard
Disk Drive" on page 4.
4 When you are sure that all connections and settings are correct,
refer to "Completing the Installation" on page 6.
If Setup still does not recognize your hard disk drive, refer to the
Troubleshooting section in your PC manual.
HP Support Services
Various service support options are provided by Hewlett-Packard's
Electronic Support Center:
For HP Vectra PCs
For HP Kayak PC
For HP Brio PCs
For HP e-pcs
For HP Monitors