Near Field Communication - Samsung SGH-T999MBATMB User Manual

Wi-Fi Calling Settings
Important! A new ISIM card must be installed within the
device prior to using this feature. Wi-Fi must first
be active and communicating prior to launching
Wi-Fi Calling.
1. From the Home screen, press
Settings More settings
2. Tap Connection Preferences and select a preference for
use of the Wi-Fi Calling feature:
• Wi-Fi Preferred: Wi-Fi network is preferred over cellular
network when making calls. Calling requires you to stay in the
Wi-Fi range.
• Wi-Fi Only: Wi-Fi network is required for making calls. Calling
requires you to stay in the Wi-Fi range.
• Cellular Preferred: The cellular network is preferred over a
Wi-Fi network when making calls.
3. Tap OK to save the setting.
4. Tap Help from the main Wi-Fi Calling Settings page to
navigate through either an on-screen tutorial or review
the top 10 Wi-Fi Calling questions.
and then tap
Wi-Fi Calling Settings.

Near Field Communication

This feature is used to read and exchange tags. When used
in conjunction with Android Beam, your device can be used
to beam application content when NFC-capable devices are
touched. For more information, refer to "TecTiles" on page
246.
1. From the Home screen, press
Settings More settings.
2. Tap the NFC field. A check mark displayed next to the
feature indicating it is enabled.
Note: Enabling NFC also enables Android Beam and S Beam.
and then tap
Changing Your Settings 289