Table of Contents
Advertisement
Note: The status LED begins to blink solid red to indicate
it has begun the start up process.
LED Color/Patterns Description
Red
- Solid
Indicates the AllShare Cast Hub is
booting or processing.
Red
- Blinking
Indicates the AllShare Cast Hub is in
standby mode (ready for connection).
Blue
- Solid
Indicates the AllShare Cast Hub is
ready to be connected with a new
device.
2. Connect your TV to the AllShare Cast Hub via an HDMI
cable (A-to-A cable) as shown above.
3. Change the source input on your TV to match the input
port used by the incoming HDMI cable.
Note: The television screen should now display an on-screen
tutorial showing you how to configure your device's
AllShare Cast Hub and device settings.
To activate AllShare Cast on your device:
1. From the Home screen, press
Settings
More settings
2. If not already on, touch and slide the AllShare Cast
slider to the right to turn it on
color indicates the activation status.
Pairing AllShare Cast Hub
To pair your device and Hub for the 1st time:
1. Locate the AllShare Hub (dongle) name displayed at the
bottom of the TV (showing the tutorial).
Ex: Name: Dongle - XXXXXX.
2. Access your device's AllShare Cast screen and locate
the same hub/dongle name in the list.
• Tap Scan if your AllShare Cast Hub (dongle) does not appear in
the list.
3. Verify your AllShare Cast Hub is on (blinking red LED)
and the on-screen tutorial is displaying on the
connected TV.
Note: The AllShare Cast Hub communicates with your paired
device via a Wi-Fi Direct connection.
and then tap
AllShare Cast.
ON
. The slider
Multimedia
207
Advertisement
Table of Contents
