Table of Contents
Advertisement
4. For a first time connection:
• Press the RESET button (located at the rear of the hub) once
and only for a second until the LED turns solid BLUE.
• Quickly tap the hub name entry on your device's AllShare Cast
screen.
5. Verify
(AllShare Cast Hub Communicating) appears
at the top of the device's screen.
6. Confirm the connection by making sure both your TV
and device show the same image/screen and
(Wi-Fi Direct Communicating) now displays on the
device.
Important! The AllShare Cast Hub is a 1-to-1 connection. If a
previous device was paired to the Hub and is still
connected to the AllShare Cast Hub, you can not
pair a new device until the first connection is
stopped.
To disconnect your device from the hub:
1. Access your device's AllShare Cast screen and locate
the current connection.
2. Tap the entry and select End connection.
208
To reconnect your device again to an existing hub:
1. Locate the AllShare Hub (dongle) name displayed at the
bottom of the TV (showing the tutorial).
Ex: Name: Dongle - XXXXXX.
Important! Verify the LED is not a solid blue. This indicates
there is another device currently connected.
2. Access your device's AllShare Cast screen and tap the
same hub/dongle name in the list.
3. Confirm the connection by making sure both your TV
and device show the same image/screen.
Advertisement
Table of Contents
