Table of Contents
Advertisement
To review your Bluetooth received files:
1. Verify Bluetooth is active.
2. From the Bluetooth settings page, press
tap Received files.
Pairing Bluetooth Devices
The Bluetooth pairing process allows you to establish trusted
connections between your device and another Bluetooth
device. When you pair devices, they share a passkey,
allowing for fast, secure connections while bypassing the
discovery and authentication process.
Note: Pairing between two Bluetooth devices is a one-time
process. Once pairing is established the devices
continue to recognize their partnership and exchange
information without entering a passcode.
To pair your device with another Bluetooth device:
1. Verify Bluetooth is active.
2. From the Bluetooth settings page, tap the Visibility field
(shown by the device name).
Your device must be visible to successfully pair with an
external device. This is shown by a green check mark.
264
3. Tap Scan. Your device displays a list of discovered in-
range Bluetooth devices.
and then
4. Tap a device from the list to initiate pairing.
5. Enter the passkey or PIN code, if needed, and tap OK.
6. The external device must accept the connection and
enter your device's PIN code.
Once successfully paired to an external device,
displays in the Status area.
Note: Due to different specifications and features of other
Bluetooth-compatible devices, display and operations
may be different, and functions such as transfer or
exchange may not be possible with all Bluetooth-
compatible devices.
Important! If callers can not hear you during a call while using
a paired Bluetooth headset (with built-in
microphone), verify the Call audio option is enabled
within the entry's Bluetooth Settings page.
Advertisement
Table of Contents
