Title Setup; Preset Button - NEC NC900C Installation Manual

LCD Menu

4-4. Title Setup

This menu is the service personnel menu. For the using service personnel menu, refer to "4-1-1. When You Use the Service
Personnel Menu" (page 63).

4-4-1. Preset Button

Use this button to set the titles to be assigned to the preset buttons (<1> to <8> buttons).
You cannot assign the same title to several preset buttons. If you want to assign any title to another number, cancel the assign-
ment once and then set it to any button again.
The "Preset Button 1 to Preset Button 8" settings correspond to buttons <1> to <8> on the control panel. To select the titles
allocated to "Preset Button 9 to Preset Button 16", press the <1> to <8> button while holding down the <Up> button on the
control panel.
76
← Select the preset button number (1 to 16).
← Display the selected number of the title.
← Select the titles to be assigned to the preset buttons.
Select the titles from those registered in advance.
To clear assignment to preset buttons, select "---".