Procedure For Recovering From Tamper Errors - NEC NC900C Installation Manual

Projector Adjustment and Connecting

3-2-1. Procedure for Recovering from Tamper Errors

If a tamper error is displayed when the projector power is turned on, recover by using the following procedure.
Is "Tamper Fail" or "Marriage Tamper
Fail" displayed?
Is "Service Door Tamper" displayed?
Is "Physical Marriage Tamper" or
"Marriage NOT Active" displayed?
48
Start recovery
Yes
No
Yes
No
Yes
No
Recovery complete
Step 1
- Attach the front cover and side cover
- Check that the equipment is correctly attached to slot
Step 2
Log in to the projector with Advanced User or higher
privileges using the buttons on the control panel.
Step 3
Perform re-marriage using the Digital Cinema
Communicator for S2