Lexmark 840dn - W B/W Laser Printer Manual page 45

Message
50 PPDS font error
51 Defective flash detected
52 Not enough free space in flash
memory for resources
53 Unformatted flash detected
54 Serial option <x> error
54 Network <x> software error
54 Standard network software error
55 Unsupported option in slot <x>
56 Parallel port <x> disabled
56 Standard parallel port disabled
56 Serial port <x> disabled
56 USB port <x> disabled
Understanding printer messages
Action
• To clear the message and continue printing, press
and then press .
The job may not print correctly.
• Cancel the current job.
To clear the message and continue printing, press
then press .
You must install different flash memory before you can download any resources to
flash.
• To clear the message and continue printing, press
and then press .
Downloaded fonts and macros not previously stored in flash memory are deleted.
• Delete fonts, macros, and other data stored on the flash memory.
• Install a larger capacity flash memory card.
To clear the message and continue printing, press
then press .
You must format the flash memory before you can store any resources on it. If the
error message remains, the flash memory may be defective and require replacing.
• Make sure the serial link is set up correctly, and you are using the appropriate cable.
• Make sure the serial interface parameters (protocol, baud, parity, and data bits) are
set correctly on the printer and host computer.
• To clear the message and continue printing, press
and then press .
The job may not print correctly.
• Turn the printer off and then on to reset the printer.
• To clear the message and continue printing, press
and then press .
The job may not print correctly.
• Program new firmware for the network interface.
• Reset the printer.
1 Turn the printer off.
2 Unplug the power cord from the wall outlet.
3 Remove the unsupported option.
4 Plug in the power cord
5 Turn the printer on.
• To clear the message, press
The printer discards any data received through the parallel port.
• Make sure the Parallel Buffer menu item is not set to Disabled.
• To clear the message, press
The printer discards any data received through the serial port.
• Make sure the Serial Buffer menu item is not set to Disabled.
• To clear the message, press
The printer discards any data received through the USB port.
• Make sure the USB Buffer menu item is not set to Disabled.
45
until
until
until
until
until
until
until Continue appears, and then press
until Continue appears, and then press
until Continue appears, and then press
Continue appears,
Continue appears, and
Continue appears,
Continue appears, and
Continue appears,
Continue appears,
.
.
.