Lexmark 840dn - W B/W Laser Printer Manual page 36

Menu selection Purpose
Parity Sets the parity for serial input and output
data frames.
Honor DSR Determines whether the printer uses the
Data Set Ready (DSR) signal. DSR is
one of the handshaking signals for most
serial interface cables.
The serial interface uses DSR to
distinguish data sent by the computer
from data created by electrical noise in
the serial cable. This electrical noise can
cause stray characters to print. Select
On to prevent stray characters from
printing.
NetWare
Use this menu selection to view or change the printer NetWare settings.
Menu selection Purpose
View Login Name Displays the assigned NetWare login
name.
View Print Mode Displays the assigned NetWare print
mode.
View Network Displays the assigned NetWare number. Selecting View Network Number displays the NetWare network
Number
Activate Activates or deactivates the NetWare
feature.
Ethernet 802.2 Sets the Ethernet 802.2 value On or Off. On*
Ethernet 802.3 Sets the Ethernet 802.3 value On or Off. On*
Ethernet Type II Sets the Ethernet Type II value On or
Off.
Ethernet SNAP Sets the Ethernet SNAP value On or Off. On*
Packet Burst Sets the Packet Burst value On or Off.
NSQ/GSQ Mode Sets the NSQ/GSQ Mode value On or
Off.
Using printer menus
Values
Even
Odd
None*
Ignore
Off*
On
Values
Selecting View Login Name displays the NetWare name on the
operator panel.
Selecting View Print Mode displays the NetWare print mode on the
operator panel.
number on the operator panel.
On
Off
Off
Off
On*
Off
Off
On
Off *
On
Off *
36
All data received by the serial port is
treated as valid data.
Only data received while the DSR signal is
high is treated as valid.
On—Activates the NetWare feature.
Off—Deactivates the NetWare feature.