Lexmark 840dn - W B/W Laser Printer Manual page 40

Message
Delete all
Delete all confidential jobs
Deleting
Disabling DLEs
Disabling Menus
Disk corrupted
Disk Recovery x/5 yyy%
Empty hole punch box
Enabling Menus
Encrypting Disk yyy%
DO NOT POWER OFF
Enter PIN
Enter PIN to lock
Error printing from USB drive
Error reading USB drive
Flushing buffer
Formatting Disk yyy%
DO NOT POWER OFF
Formatting Flash DO NOT POWER OFF
Insert print cartridge
Insert Tray <x>
Insert hole punch box
Understanding printer messages
Action
• To delete all held jobs, press
• Press to cancel the operation.
• To delete all confidential jobs, press
.
• Press to cancel the operation.
Wait for the message to clear.
Wait for the message to clear.
Wait for the message to clear.
Note: While the menus are disabled, you cannot change the printer settings from the
operator panel.
The printer has attempted a disk recovery process, and cannot repair the disk.
• To reformat the disk and delete all files currently stored on the disk, press
Continue appears, and then press
• To clear the message without reformatting the disk, press
reformat appears, and then press
Warning: Do not turn the printer off while this message is displayed.
The printer is attempting to recover the hard disk. Disk recovery takes place in five
phases; the operator panel displays the percent complete of the current phase.
Wait for the message to clear.
• Empty the hole punch box, and if necessary, reset the hole punch counter.
• To clear the message and print without using the hole punch feature, press
Continue appears, and then press
Wait for the message to clear.
Warning: Do not turn the printer off while this message is displayed.
The printer is encrypting the hard disk. The percent complete is displayed.
Wait for the message to clear.
Enter the PIN you identified in the driver when you sent the confidential job to the
printer.
Enter the correct pin number to lock the operator panel and prevent menu changes.
Wait for the message to clear.
Wait for the message to clear.
Wait for the message to clear.
Warning: Do not turn the printer off while this message is displayed.
The printer is formatting the hard disk. The percent complete is displayed.
Wait for the message to clear.
Warning: Do not turn the printer off while this message is displayed.
Wait for the message to clear.
Insert the print cartridge to clear the message.
Insert the specified tray into the printer.
• Install the hole punch box.
• To clear the message and print without using the hole punch feature, press
Continue appears, and then press
40
until Continue appears, and then press
until Continue appears, and then press
.
.
.
.
.
until
until
Do not
until
until