Battery Eject Arm - HP Probook 5310m Maintenance And Service Manual

Removal and replacement procedures

Battery eject arm

Description
Latch Kit (includes battery eject arm, latch, and spring)
Before removing the battery eject arm, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on,
and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the following components:
a. Accessory cover (see
b. Keyboard (see
c. Button board and cable (see
d. Top cover (see
e. System board (see
Remove the battery eject arm:
1. Turn the base enclosure upside down, with the front toward you.
2. Use a flat-bladed screw driver 1 or similar tool to release the battery eject latch from the base enclosure.
3. Remove the the battery eject latch 2.
4–40
"Battery" on page
"Mass storage device" on page
"Keyboard" on page 4-22)
"Button board and cable" on page
"Top cover" on page 4-27)
"System board" on page
4-7).
4-9)
4-25)
4-32)
Spare part number
581090-001
Maintenance and Service Guide