Top Cover - HP Probook 5310m Maintenance And Service Manual

Top cover

Description
Top cover (includes TouchPad button board and cable, and TouchPad board and cable)
Before removing the top cover, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on,
and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the following components:
a. Accessory cover (see
b. Keyboard (see
c. Button board and cable (see
Remove the top cover:
1. Turn the computer upside down, with the front toward you.
2. Remove the following screws:
❏
Three Torx T8M2.5×5.0 screws 1 in the battery bay
❏
Three Torx T8M2.5×6.0 screws 2 in the mass storage device bay
❏
Two Torx T8M2.5×9.0 screws 3 in the RTC battery compartment
Maintenance and Service Guide
"Battery" on page
"Mass storage device" on page
"Keyboard" on page 4-22)
"Button board and cable" on page
4-7).
4-9)
4-25)
Removal and replacement procedures
Spare part number
581105-001
4–27