Using Your Wireless Speaker System - RocketFish Rocketboost RF-RBWS01 User Manual

Using your wireless speaker system

Turning on the wireless sender/receiver and wireless
speaker
To turn the wireless sender/receiver on and off:
When initially connecting to an AC outlet, the device automatically turns
1
on. To turn off the device, press
standby indicator turns red.
If the wireless sender/receiver is off, press
2
indicator lights.
To turn the wireless speaker on and off:
When initially connecting to an AC outlet, the device automatically turns
1
on. To turn off the device, press
standby indicator turns red.
If the wireless speaker is off, press
2
lights.
Establishing communication
Rocketboost products form an audio network and each Rocketboost
receiver can select the audio from any Rocketboost sender in the
network.
Important
Every Rocketboost network must contain one hub device, which
helps devices join the network. The network can have only one hub,
which you can enable using the hub switch on the back of all
Rocketboost senders and wireless sender/receivers.
If this is your first Rocketboost product, you should make the wireless
sender/receiver the hub, if you already have Rocketboost products,
you should disable hub mode on this device.
Important: Hub devices must always have power for your network to operate. The hub
device can be in standby (power saving) mode, but must stay plugged in.
. The power indicator turns off and the
to turn it on. The power
. The power indicator turns off and the
to turn it on. The power indicator
RF-RBWS01 19