RocketFish Rocketboost RF-RBWS01 User Manual page 16

Connecting your wireless sender/receiver
: Make sure that the device is located at least 18" from any WiFi router.
To connect the wireless sender/receiver to an audio source and AC power:
Connect your audio source to the LINE In jack or USB jack on the rear of
1
the sender, using the 3.5 mm audio cable or the USB cable. If necessary,
you can also use the 3.5 mm to RCA adapter, if your audio device uses
RCA-type line out connectors. You can select either USB-In or LINE-In
operation using the remote control, depending on which audio input
you are using.
Remember to turn the volume up on your source device to at least 80%
2
of its maximum volume if connected to a headphone output.
Connect the AC power adapter to the wireless sender/receiver and plug
3
into an AC power outlet. The wireless sender/receiver automatically
turns on and the power indicator turns green.
Notes:
- Make sure that the AC power outlet matches the wireless sender/receiver's AC input
(100-240V) before connecting.
16
3.5 mm cable (supplied)
3.5 mm cable and 3.5 mm to RCA adapter (supplied)
USB cable (supplied)
To audio output jack
To USB jack