Kyocera FS-C8500DN Installation Instructions page 4

4
5
6
1
2
3
4
1-4
To send email print jobs, the email port must be able to establish a connection with
an SMTP mail server. Type the SMTP server name or IP address. Click Test to verify
the connection to the SMTP server. Click Next.
Type the Printing system Email address where print jobs will be received. Click
Search to search the network for printing systems with email printing capability.
To configure the printing system for email, in the Printing System Search dialog, click
Configure. Type the IP Network Address and Subnet Mask of a remote network
segment. Click Add to add it to the address list. All networks on the IP Network
Discovery List will be searched, in addition to the local network segment. When
finished, click OK to save settings and close the dialog boxes.
Type the Port name, or accept the email address as the port name.
If desired, select Display the print job cover page dialog to display the cover page
configuration dialog for each print job.
If desired, select Generate return receipts to direct the printing system to send an
email confirmation for each print job.
Click Next.
If the mail server requires SMTP authentication, select Use SMTP authentication,
and type an authorized User ID and Password.
On some systems that limit the size of individual emails, it may be necessary to split
emails into more multiple email segments. To do this, select Split into multiple
emails when larger than this size, and type the desired number of kilobytes (KB).
Confirm the settings, and then click Finish.
The following message appears: The port for emailptr@company.com is
successfully created. The port may be selected for printer drivers using the Windows
Add Printer wizard. Click OK.
The port addition is complete, and the KPrint Add Port wizard closes.
Add a Network FAX Port
In the KPrint Add Port wizard, select Network FAX. Click Next.
If you know the IP address or Host name, type it in the text box.
If you do not know the IP address or Host name, click Search to open a list of
available printing systems and their related IP addresses. Select a printing system.
To type a broadcast address for the network to be searched, click Configure. When
finished, click OK to save settings and close the dialog boxes.
Click Next.
Type a Port name and then click Next, or just click Next to accept the port name
displayed. Existing port names cannot be used.
Confirm the settings, and then click Finish.
The port addition is complete, and the KPrint Add Port wizard closes.
Add a Network FAX Port
7.3b_06.13.08
KPrint Installation
1