Kyocera FS-C5400DN Operation Manual page 129

Key Confirmation: a b
1
Off
2 *On
Job Finish:
1 *Off
2
On
Ready:
1 *Off
2 On
Using the Operation Panel
Key Confirmation (Key confirmation tone setting)
When On is selected in this setting, a tone sounds each time a key is
used. The default setting is On.
1
In the Buzzer menu screen, press
Confirmation.
2
Press [OK]. The Key Confirmation screen appears.
3
Press or
4
Press [OK]. The key confirmation tone setting is set and the Buzzer
menu reappears.
Job Finish (Job completed tone setting)
When On is selected in this setting, a tone sounds when printing ends.
The default setting is Off.
1
In the Buzzer menu screen, press
2
Press [OK]. The Job Finish screen appears.
a b
3
Press
enabled.
4
Press [OK]. The printing completed tone setting is set and the Buzzer
menu reappears.
Ready (Preparation completed tone setting)
When On is selected in this setting, a tone sounds when print preparation
has been completed. The default setting is Off.
1
In the Buzzer menu screen, press
2
Press [OK]. The Ready screen appears.
a b
3
Press
enabled.
4
Press [OK]. The preparation completed tone setting is set and the
Buzzer menu reappears.
to select whether the key confirmation tone is enabled.
or to select whether the printing completed tone is
or to select whether the preparation completed tone is
or to select Key
or to select Job Finish.
or to select Ready.
4-73