Kyocera FS-C5150DN User Manual page 37

Multiple Pages per Sheet
Edit Quick Print
Editing Quick Print Options
1
2
3
4
5
KX DRIVER
Turn the long edge of the page to view the content.
Flip on short edge
Turn the short edge of the page to view the content.
Multiple pages per sheet prints several pages on a single sheet of paper for
the purpose of reviewing the document and conserving paper. The size and
readability of the multiple pages decrease as the number of pages per sheet is
increased. You can set the arrangement of the pages from the Layout tab as
well as print borders around each of the pages.
When Multiple pages per sheet is selected, Poster and Scaling are
unavailable.
The assortment of icons at the top of the Quick Print tab can be customized to
include features that you use most often. Any number of icons from 0 to 5 can
be displayed. All icons can be removed from view if you want to use only the
Profiles options in the Quick Print tab.
Note: An administrator can hide the Edit Quick Print button by selecting
Hide Edit Quick Print control in Device Settings > Administrator Settings.
The Edit Quick Print button is not available when the driver is accessed from
an application's Print dialog box.
You can select from a limited set of driver features to appear in the Quick Print
tab.
Click Start and click Devices and Printers (Windows 7), or click Control Panel
and double-click Printers (Windows Vista), or Printers and Faxes (Windows
XP).
Right-click on the desired printing system model and click Printing
Preferences.
Select the Quick Print tab.
Click Edit Quick Print to open the Edit Quick Print dialog box.
To add a feature to the Quick Print tab, select the feature under Available
controls, and click the right arrow to move the feature to Selected controls.
A maximum of 5 features can appear under Selected controls.
To remove a feature from the Quick Print tab, select the feature under
Selected controls, and click the left arrow to move the feature to Available
controls. To use only the Profiles in the Quick Print tab, move all features
to Available controls.
Click the up and down arrows to change the position of the features under
Selected controls. The feature at the top appears on the left in the Quick
Print tab.
To restore the list to factory default options, click Reset.
After making your selections, click OK.
Quick Print
3-3