Background Removal]; Mixed Original] - Konica Minolta bizhub C280 User Manual

3.3 [Original/Density]
3.3.5

[Background Removal]

You can adjust the density of the background area for originals with colored background (newsprints, recycle
paper, etc.) or originals on thin paper showing text or images from the back.
%
Press [Original/Density] ö [Background Removal].
Settings
[Bleed Removal]
[Paper Discoloration Adj]
[Background Removal Lev-
el]
[Main Screen]
3.3.6

[Mixed Original]

Originals of different sizes are loaded into the ADF and scanned at a time.
To copy onto the same paper sizes as the original, select [Full Size] in the Zoom screen and select [Auto] in
the Paper screen. To copy all pages on the same size paper, select [Auto Zoom] in the Zoom screen and
select the desired paper size in the Paper screen.
NOTICE
Load all of the original pages into the ADF so that the top of the pages is toward the back or the left side of
the machine.
0 [Mixed Original] is available only if the optional ADF is installed.
1
Slide the Lateral Guide of the ADF to fit the size of the largest page.
bizhub C360/C280/C220
Select this setting to remove background prints of the original. Normally,
select [Bleed Removal].
If the original to be scanned has a colored background, adjust the back-
ground with this button to remove it before copying.
[Light] Each time this button is pressed, the background
density is lightened by one level.
[Standard] Press this button to select the third level from the
right (default).
[Dark] Each time this button is pressed, the background
density is darkened by one level.
[Auto] The background density is detected automatical-
ly and adjusted to the optimal level.
Press this button to return to the basic settings screen with the changed
settings applied.
3
3-17