Xerox 5400DX - Phaser B/W Laser Printer Technical Instructions page 3

PHASER 5400 Technical Instructions
Photo 15
Photo 16
Photo 17
Photo 18
Photo 19
Photo 20
Step 10
Apply conductive grease to the black PCR
saddle block. Install PCR into saddle blocks.
(See Photo 15&16)
Step 11
Clean drum using soft dry cloth.
Apply padding powder to the drum.
(See Photo 17&18)
Step 12
Install the drum and drum axils. Install screws
for the drum axils. Rotate drum to ensure
smooth operation. Remove excess padding
powder using a soft dry cloth from the drum
and PCR area.
(See Photo 19&20)
Step 13
Set aside the waste unit. Protect the drum
from light exposure.
Step 14
Starting on the toner unit, remove
the gear side end cap.
(See Photo 21)
Photo 21
Step 15
Lift up on the mag roller release
handle. Remove the mag roller from
the cartridge. Use a vacuum or dry
compressed air to remove toner.
(See Photo 22&23)
Photo 22
Photo 23
3