Authentication Properties Window - Lenovo 20074CU User Manual

Figure 16. Authentication Properties window
10. Go to step 38 on page 25.
11. If you selected Wired LAN (Ethernet) in step 5 on page 8, you can enable
b. Click Authentication Properties; then enter the authentication settings
provided by your network administrator.
c. Click OK.
7. You can prevent multiple simultaneous connections, and thus conserve battery
life, by selecting Disconnect from the network and power off any wireless
radio associated with this profile when switching to a different location.
8. Click Next.
9. Enter your wireless network configuration; then click Next.
IEEE 802.1x authentication for the wired network (EAPoL). Do as follows:
a. Select Enable IEEE 802.1x authentication for Ethernet.
Chapter 2. Using location profiles
15