Appendix B. Command Line Interface - Lenovo 20074CU User Manual

Appendix B. Command line interface

Access Connections can accept commands entered from the command line to
switch between location profiles and to import or export location profiles. You can
enter the following commands from a command prompt window, or you can create
batch files for use by other users. Access Connections does not need to be running
before these commands are executed.
© Lenovo 2006. Portions © IBM Corp. 2006.
Apply a location profile.
<path>\qctray.exe /set <location profile name>
Disconnect a location profile.
<path> \qctray.exe /reset <location profile name>
Delete a location profile.
<path> \qctray.exe /del <location profile name>
Import a location profile (valid only for files with .loc extension.)
<path> \qctray.exe /imp <location profile path>
Import a location profile by use of GUI (valid only for files with .loc extension.)
<path> \qctray.exe /GUIImp <location profile path>
Perform silent import of all profiles.
<path> \qctray.exe /importsilently
Import a signature file.
<path> \qctray.exe /importsignaturefile
Export a location profile (valid only for files with .loc extension.)
<path> \qctray.exe /exp <location profile path>
Migrate all location profiles.
<path> \qctray.exe /migratelocations
Apply dummy SSID profile for wireless cards (regardless of which profile was
most recently active) and return immediately. Do not turn off the Wireless Radio.
<path> \qctray.exe /disconnectwl
Close AcMainGUI, AcTray, AcWlIcon modules.
<path> \qctray.exe /exit
Enter a special monitor mode in which all roaming is blocked, Ethernet as well
as Wireless. Also when the third party application that has called this API is
closed, reset the monitor mode.
<path> \qctray.exe /setmonitormode
Reset the monitor mode.
<path> \qctray.exe /resetmonitormode
Kill all Access Connections processes. Since this requires administrative
privileges, the command will be routed through AcPrfMgrSvc to close all other
Access Connections processes except for profile manager service.
<path> \qctray.exe /killac
Restart all Access Connections processes. Since this requires administrative
privileges, the command will be routed through AcPrfMgrSvc.
<path> \qctray.exe /startac
Find Wireless networks.
<path> \qctray.exe /findwlnw
Display QCTRAY help information.
<path> \qctray.exe /help
77