Specifications - Eizo RADIFORCE RX211 User Manual

8. Specifications

. Specifications
LCD Panel
Viewing Angle
Dot Pitch
Horizontal Scan
Frequency
Vertical Scan Frequency Analog
Resolution
Max.Dot Clock
Max. Display Color
Recommended Brightness
Display Area(H × V)
Power Supply
Power Consumption
Input Connector
Analog Input Signal (Sync)
Analog Input Signal (Video)
(Digital)
Input Signal
Signal registration
Plug & Play
Environment Conditions Temperature
USB
Classification of Equipment
0
54cm(21.3 inch), TFT color LDC panel
Surface treatment: Anti-Glare Hard Coating
Surface hardness: 2H
Response Time: 17ms
Horizontal:170°, Vertical: 170° (CR 10 or more)
0.270mm
Analog 24 ~ 100 kHz (Automatic)
Digital 31 ~ 100 kHz
49 ~ 86 Hz (Automatic) (1200 x 1600: 49 ~ 76 Hz)
Digital 59 ~ 61 Hz, (VGA TEXT: 69 ~ 71 Hz)
2M pixels (Portrait: 1200 × 1600 dots (H × V))
Analog: 202.5 MHz, Digital: 162 MHz
16.77 million colors
300 cd/m
between 6500K to 8000K
324.0mm × 432.0mm (12.8"(H) x 17.0"(V))
100-120/200-240 VAC±10%, 50/60 Hz, 1.1-0.9A
/0.6-0.45A
Max.:
Min.(Normal):
Power saving mode:
Main power off:
DVI-D, D-sub mini 15pin
Separate, TTL, Positive/Negative
Composite, TTL, Positive/Negative
Sync on Green, 0.3 Vp-p, Negative
0.7 Vp-p / 75 ohms, Positive
TMDS (Single Link)
Analog 45 (Factory preset: 30)
Digital 10 (Factory preset: 0)
VESA DDC 2B / EDID structure 1.3
Operating: 0 °C ~ 35 °C (32 °F ~ 95 °F)
Storage: -20 °C ~ 60 °C (-4 °F ~ 140 °F)
Humidity Operating:30 % to 80 % R.H. Non-condensing
Storage: 30 % to 80 % R.H. Non-condensing
Pressure Operating: 700 to 1,060 hPa
Storage: 200 to 1,060 hPa
Standard USB Specification Revision 2.0
USB ports Upstream port × 1, Downstream port × 2
Communication 480 Mbps (high), 12 Mbps (full), 1.5 Mbps (low)
Speed
Power Supply Downstream: 500 mA for each (Max.)
Type of protection against electric shock : Class I
EMC class : EN60601-1-2: 2001 Group 1 Class B
Classification of medical device (MDD 93/42/EEC) :
Class I
2
(approx.35%) with color temperature of
115W (With USB load)
105W (Without USB load)
Less than 3W
(for single signal input
without USB load))
0W