Convenient Functions; Channel Level; Fader Function; Quick Select Function - Denon AVR 4308 - Sony Bravia 40" TV Owner's Manual

<DIRECT/STEREO>
<DSP SIMULATION>
<STANDARD> <PURE DIRECT>
<POWER> uiop QUICK SELECT
<ZONE2 ON/OFF> CH SELECT, <ENTER>
QUICK SELECT
uio p
About the button names in these explanations
< >
: Buttons on the main unit
[ ] : Buttons on the remote control unit
Button name only:
Buttons on the main unit and remote control unit
59

Convenient Functions

Channel Level

<STATUS>
You can adjust the channel level either according to the
playback sources or to suit your taste, as described
below.
1
CH SELECT
Press
2
Use ui or
The speaker that can be set switches each time one of the
buttons is pressed.
3
Use o p to adjust the volume.
b "OFF" can be set by pressing o when the subwoofer's volume is
set to –12 dB.

Fader Function

This function lets you adjust (fade) the sound from all the
front or rear speakers at once.
1
CH SELECT
Press
2
Press ui or
3
Use o p to adjust the volume of the speakers.
CH SELECT
(o: front, p: rear)
• The fader function does not affect the subwoofer.
• The fader can be adjusted until the volume of the speaker adjusted
to the lowest value is –12 dB.
.
CH SELECT
to select the speaker.
.
CH SELECT
to select "FADER".

Quick Select Function

With this function, the currently playing input source, input
mode, surround mode, room EQ settings and volume can
be stored in the memory.
1
Set the input source, input mode, surround mode,
room EQ settings and volume to the conditions you
want to store.
2
QUICK SELECT
Press and hold the desired
Keep pressing the button until the quick select indicator lights.
[Quick Select Defaults]
Input Source
Quick Select 1 DVD
TV/CBL
Quick Select 2
Quick Select 3 VCR
• To call out the settings, press QUICK SELECT at which the desired
settings were stored.
• The Quick Select name can be changed (vpage 35).
NOTE
Input sources stored with the quick select function cannot be selected
if they have been deleted at GUI menu "Manual Setup" – "Option
Setup" – "Source Delete" (vpage 35). In this case, store them
again.
.
Volume
–40 dB
–40 dB
–40 dB