Table of Contents
Advertisement
GWireless LANH
Symptom
Cause
Cannot connect
• The
settings
of
the
to network.
and network key (WEP) are
incorrect.
• The reception is poor and the
signals cannot be received.
• There are multiple networks and
the usable channels overlap.
Played sound is
• There are multiple networks and
interrupted or
the usable channels overlap.
sound cannot be
played.
GXM Satellite RadioH
Symptom
Cause
"CHECK
• AVR-4308CI's XM connector and
ANTENNA" is
the XM Mini-Tuner and Home
displayed in the
Dock is not properly connected.
XM mode.
"NO SIGNAL " is
• The signal cannot be received.
displayed in the
XM mode.
"OFF AIR" is
• The selected channel is not
displayed in the
currently broadcasting.
XM mode.
Receiving only
• The XM Tuner is not activated.
XM channels 0
and 1.
89
Countermeasure
SSID
• Match the network settings with
the AVR-4308CI's settings.
• Shorten the distance from the
wireless LAN's access point,
remove
any
obstacles
and
otherwise improve visibility, then
try reconnecting. Also install
away from microwave ovens
and the access points of other
networks.
• Set the access point's channel
settings away from the channels
used
for
other
networks.
Alternatively, connect using a
network cable.
• Set the access point's channel
settings away from the channels
used
for
other
networks.
Alternatively, connect using a
network cable.
Countermeasure
• Check that the connections are
correct.
• Reposition your XM Mini-Tuner
and Home Dock antenna.
• Select another channel.
• Contact XM Radio.
Page
33
Specifications
–
n
Audio section
• Power amplifer
Rated output:
–
–
Dynamic power:
Output connectors:
• Analog
Input sensitivity / Input impedance:
Frequency response:
S/N:
Page
Distortion:
18
Rated output:
• Digital
D/A output:
50
Digital input:
• Phono equalizer (PHONO input — REC OUT)
49, 50
Input sensitivity:
RIAA deviation:
S/N:
Rated output:
49
Distortion factor:
Front:
140 W + 140 W (8 Ω/ohms, 20 Hz ~ 20 kHz with 0.05 % T.H.D.)
170 W + 170 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.)
Center:
140 W (8 Ω/ohms, 20 Hz ~ 20 kHz with 0.05 % T.H.D.)
170 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.)
Surround (A + B):
140 W + 140 W (8 Ω/ohms, 20 Hz ~ 20 kHz with 0.05 % T.H.D.)
170 W + 170 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.)
Surround back:
140 W + 140 W (8 Ω/ohms, 20 Hz ~ 20 kHz with 0.05 % T.H.D.)
170 W + 170 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.)
150 W x 2ch (8 Ω/ohms)
220 W x 2ch (4 Ω/ohms)
Front, Center, Surround back
6 ~ 16 Ω/ohms
Surround: A or B
6 ~ 16 Ω/ohms
A + B
8 ~ 16 Ω/ohms
200 mV / 47 kΩ/kohms
10 Hz ~ 100 kHz +1, –3 dB (DIRECT mode)
102 dB (DIRECT mode)
0.005 % (20 Hz ~ 20 kHz) (DIRECT mode)
1.2 V
Rated output — 2 V (at 0 dB playback)
Total harmonic distortion — 0.008 % (1 kHz, at 0 dB)
S/N ratio — 102 dB
Dynamic range — 100 dB
Format — Digital audio interface
2.5 mV
±1 dB (20 Hz to 20 kHz)
74 dB (A weighting, with 5 mV input)
150 mV
0.03 % (1 kHz, 3 V)
Advertisement
Table of Contents
