Table of Contents
Advertisement
Using the Remote Control
3.
Swap Button
You can swap the main screen and the sub-screen when the PIP/POP/PBP function is used.
PIP
POP
PBP
When 'Input Signal 1' comes on in the main screen, only 'Input Signal 2' can be displayed on the sub-screen. On
the contrary, if the main screen displays 'Input Signal 2', the sub-screen can display 'Input Signal 1' only. You can
swap 'Input Signal 1' and 'Input Signal 2' using the SWAP button.
<Table of PIP/POP/PBP Function Support>
CVBS
S-Video
SCART 1
COMPONENT 1
SCART 2
COMPONENT 2
Inserting batteries into remote controller.
1. Take out the battery cap.
2. Insert the battery with correct polarity (+/-).
3. Close the battery cap.
• You can use a remote controller 7 meter distance and 30 degree (left/right)
within the receiving unit scope.
• Dispose of used batteries in the recycle bin to prevent environmental pollution.
SWAP
SWAP
SCART 1
CVBS
S-Video
COMPONENT 1
COMPONENT 2
A7
SCART 2
Advertisement
Table of Contents
