Table of Contents
Advertisement
How to adjust the OSD (On Screen Display) screen
Pops up the
Select a menu
menu screen
icon
1
Press the MENU Button, then the main menu of the OSD appears.
2
To access a control, use the
3
When the icon you want becomes highlighted, press the SET Button.
4
Use the
5
Accept the changes by pressing the SET Button.
6
Exit the OSD by Pressing the EXIT Button.
How to adjust the screen automatically
You need to adjust the screen display when connecting the monitor to a
new computer or changing the mode. Refer to the following section to
set an optimal monitor screen.
Press the AUTO/SELECT button (AUTO button in a remote controller)
in the PC analog signal. Then, an optimal screen status will be selected
that fits into the current mode.
If adjustment is not satisfactory, you need to adjust screen position,
clock and phase in the OSD menu.
Select a menu icon
Adjust the status
• Use the remote controller to adjust the OSD screen.
Buttons.
Buttons to adjust the item to the desired level.
A20
Save
Exit from the
adjustment
menu screen.
Advertisement
Table of Contents
