Connecting the DVD/HDTV
Connect the video/audio cable as shown in the below figure and then, connect the power
cord (See page A11).
Connect the input terminal with a proper color match.
•
Select the terminal that can be connected most easily among COMP-1 and COMP-2.
•
Video
Monitor
DVD
HDTV Receiver
Select an input signal.
Press the Input Select button on the remote controller to select the
input signal. Or, press the SOURCE button at the front side of the
monitor.
When connecting with a Component/audio cable.
• Select COMPONENT 1 / COMPONENT 2
DVI DIGITAL
DSUB ANALOG
VIDEO1(CVBS)
VIDEO2(S-Video)
COMPONENT 1
COMPONENT 2
[Case 2]
A15