Table of Contents
Advertisement
Selecting and Adjusting the Screen
Selecting the Options
LANGUAGE
IMAGE SIZE
OSD
POSITION
TRANSPARENCY
ZOOM
RESET
Note
When connected to your computer, the Zoom menu will be disabled if the screen size is 1:1 or
PIP/POP/PBP is in use.
To choose the language in which the control names are
displayed.
To select the image size of the screen. (FULL/1:1)
To adjust position of the OSD window on the screen.
Press the
button to display the submenu for OSD
POSITION.
Left
Right
Up
Down
To adjust the transparency of the OSD menu screen.
Use this function to zoom in the screen. When you turn the monitor
off and on again, the default screen size will be restored.
Press the
button to display the submenu for OSD
POSITION.
* If the zooming value is set to '0', vertical
and horizontal positioning cannot be
adjusted.
Use this function to reset the monitor to the factory default.
However, language selection will not be initialized.
A23
Moving the OSD screen position horizontally.
Moving the OSD screen position vertically.
Advertisement
Table of Contents
