Table of Contents
Advertisement
WARNING: Fan may fall if not assembled as directed in these
installation instructions.
4-1. Insert the downrod through the canopy and canopy trim ring.
Feed the wires from the fan through the downrod.
4-2. Using the provided allen wrench, loosen the allen head set screw
on the adapter to install the pipe and ball assembly. Note: When
the pipe and ball assembly is fully installed, 2-3 threads on the
pipe will still be visible; this is normal. Securely retighten the set
screw with the allen wrench.
CAUTION: e adapter has a special coating on the threads. Do
not remove this coating; the coating prevents the downrod from
unscrewing. Once assembled, do not remove the downrod.
4-3. Raise the fan and place the hook on the ceiling plate through the
U-shaped hole in the rim.
41957-01 • 12/09/05
4 • Assembling and Hanging the Fan
Step 4-1
Allen Head
Set Screw
Step 4-3
Downrod
Canopy
Canopy
Trim Ring
Upper Motor
Housing
U-shaped
7
Hole
Hunter Fan Company
Advertisement
Table of Contents
