Table of Contents
Advertisement
3 • Assembling the Blade Brackets
Steps 3-1 – 3-2
Blade Bracket
Step 3-3
Upper Motor
Housing
6
Hunter Fan Company
3-1. Place the blade bracket through the hole in the side of the lower
motor housing.
3-2. Install the two blade bracket screws.
3-3. Place the upper motor housing over the adapter. Align the holes
in the upper motor housing with the holes in the adapter.
3-4. Partially install the three motor housing screws.
Note: Make sure the gap between the upper and lower motor
housing is even all the way around.
3-5. Securely tighten all three motor housing screws.
41957-01 • 12/09/05
Advertisement
Table of Contents
