Chapter 3 Connecting Cables; Connecting Two Pcs To The Monitor - Eizo FlexScan S2031W User Manual

Chapter 3 Connecting Cables

3-1 Connecting Two PCs to the Monitor

Two PCs can be connected to the monitor through the DVI-I and the D-Sub
mini 15 pin connector on the back of the monitor.
Connection examples
S2031W
PC 1
DVI Signal cable
(supplied with FD-C39)
D-Sub mini Signal cable
15-pin (FD-C16 option)
Selecting input signal
Switch the input signal with
When the signal is switched, the active signal type (Analog or Digital) appears
at the top right corner of the screen.
S2431W
Signal cable
(supplied MD-C87)
Signal cable
(supplied MD-C87)
Input Signal Selection button
. Input signal switches each time
• When using an optional signal cable
PC 2
D-Sub mini
15-pin
D-Sub mini
15-pin
is pressed.
Chapter 3 Connecting Cables
Attention
(FD-C16), be sure to connect the
D-Sub mini 15-pin connector to the
PC, and the DVI-I connector to the
monitor. Wrong connection may
result in no picture display.
25