Setting Brightregulator; To Set Automatic Brightness Adjustment [Brightregulator]; Resumption Of Default Setting; To Reset Color Adjustment [Reset] - Eizo FlexScan S2031W User Manual

2-12 Setting BrightRegulator

●

To set automatic brightness adjustment [BrightRegulator]

The sensor on the front side of the monitor detects the environmental brightness
to adjust the screen brightness automatically and comfortably.
(1) Choose <Others> from the Adjustment menu, and press
(2) Choose < BrightRegulator> from the <Others> menu, and press
The BrightRegulator setting window appears.
(3) Select "Enable" or "Disable" with
The BrightRegulator setting is completed.

2-13 Resumption of Default Setting

●

To reset color adjustment [Reset]

The hue in the color mode currently set will revert to the default settings (factory
settings).
(1) Choose <Color> from the Adjustment menu, and press
(2) Choose <Reset> from the <Color> menu and press
The <Reset> menu appears.
(3) Select <Reset> with
The reset operation is completed.
●

To reset all settings [Reset]

Reset all adjustments/settings to the factory default settings.
(1) Choose <Others> from the Adjustment menu, and press
(2) Choose <Reset> from the <Others> menu, and press
The <Reset> menu appears.
(3) Select <Reset> with
The reset operation is completed.
24
Chapter 2 Settings and Adjustments
or , and press
or , and press .
or , and press .
• Be careful not to block the sensor on
.
.
.
• For main default settings, refer
.
.
.
.
NOTE
the lower side of the monitor when
using the BrightRegulator function.
NOTE
to "Main default settings (factory
settings)" on page 34.