HP Jetdirect 280m - 802.11b Wireless Print Server User Manual page 62

Network Basics
Tips on Getting Started
Background
Installing a network printer is quite straightforward:
First, you set up your hardware. This involves setting up your printer, and
then setting up a print server to connect the printer to your network.
Then, you run the network printing software to install the printer on your
computer.
If you have purchased your printer and print server separately, you probably have
two sets of documentation and two installation CDs -- which do you use? The
section below on
In addition, sometimes it's not immediately apparent where to find the printer
driver that the installer needs. The section below on
driver? provides some useful pointers.
Finally, the section below on
installation process is complete and whether, if you have two CDs, you need to use
both of them.
If you would like a brief overview of what networks and network printing are
about, along with some additional detail on the installation process, click here for
The Network Basics
Which CD do I use?
If you have both a printer CD and the Jetdirect CD, the steps below will help you
file:///C|/Bottlecap_Structure_26--TestMerge/DOCS/EN/NETBASIC/START.HTM (1 of 5) [5/20/2003 3:46:12 PM]
Which CD do I use?
When do I stop?
Tutorial.
should help you get started in the right place.
Where do I find the printer
answers questions about when the