Information; Transmission Function; Function Type; Notes On Using Fax Functions (G3) - Konica Minolta bizhub C220 User Manual

2.1

Information

2 Before using the Network Scan/Fax/Network Fax
functions
This section describes necessary information you should be aware of before using the fax and scan functions
of this machine.
2.1 Information
7 CAUTION
- To turn the Main Power Switch off and on, first turn the main power off, and then on again after 10 or
more seconds has elapsed. Not doing so may result in an operation failure.
2.1.1

Transmission function

Function type

Using this machine, scanned images can be sent or received via network or telephone line. This User's Guide
introduces the following functions.
Functions
Network scan function
Fax function
Network fax function

Notes on using fax functions (G3)

Reference
- To use the fax function, the optional Fax Kit FK-502 is required.
Fax data cannot be sent/received in color with this machine.
This machine can connect to the following telephone lines.
- Subscribed telephone lines (including facsimile communication networks)
- PBX (Private Branch exchange, 2-wire)
Check the following for the telephone line to be used.
- You cannot connect a business phone as an external telephone.
- If a digital dedicated line is multiplexed in an enterprise network, fax transmission speed may be limited,
or the Super G3 fax may not be available.
Communication error may occur on rare occasions due to the factory default setting. This is because the mul-
tiplex device limits the frequency band of the line to the utmost limit based on the assumption that the line is
intended for voice communication. Also, these restrictions differ depending on the device that make up the
network. For details, contact your network administrator.
bizhub C360/C280/C220
Transmission Options
• E-Mail
• FTP
• SMB
• User Box
• WebDAV
• Web Service
• Sending and receiving G3 fax
• Polling
• Internet Fax (I-FAX)
• IP Address Fax
2
2-2