Installation; Connecting Up; Pc Settings; Connecting The Cables - Eizo FlexScan L660 User Manual

1 INSTALLATION

1-1 Connecting up

PC Settings

Before connecting your PC to the LCD monitor, change the display screen
settings (resolution and frequency) in accordance with those below.
• The maximum resolution of this LCD monitor is 1280 x 1024 at a
maximum fV of 75 Hz.
Using the LCD monitor with Windows
A Monitor information file is saved in the EIZO LCD Utility Disk included
in the package. It includes all the LCD required information for best
operation with Windows 95/98. Please install the enclosed utility and select
"EIZO L660/L661/L680" from the monitor list in Windows 95/98.
For installation procedure, please read the readme.txt in the utility disk.

Connecting the Cables

(1) Be sure that the power switches of both the PC and the LCD monitor are
OFF.
(2) Remove the rear cover from the monitor. When removing the rear cover,
push down the buttons while pulling.
(3) Plug the signal cable into the D-Sub connector at the rear of the monitor.
Please ensure that the arrow mark on the casing of the connector is
visible when connecting.
When connecting the signal cable, check that the shape of the cable
connector matches the shape on the LCD monitor.
fH: 27 kHz-82 kHz fV: 50 Hz-85 Hz
®
95/98
buttons
1 INSTALLATION
E
11