Eizo FlexScan L660 User Manual page 12

(4) Plug the other end of the cable into the video connector on the rear of
the PC.
Standard PC graphics board
Macintosh
D-Sub mini15
(5) Plug the power cord into the power connector on the rear of the LCD
monitor.
(6) Replacing the connector cover and the rear cover.
a) Insert the rear cover into the inlets at the bottom of the stand.
b) To close easily, the LCD monitor should be tilted forward. Attach
(7) Plug the other end of the power cord into a power outlet.
(8) Turn on the monitor's main power and then switch on the PC power.
Whenever you finish your operation, turn off the PC and the monitor.
12
1 INSTALLATION
D-Sub mini15
D-Sub mini15
Signal Cable (enclosed)
D-Sub mini15
D-Sub mini15
Signal Cable (enclosed)
D-Sub mini15
pin
pin
Signal Cable (enclosed)
the connector cover to the rear panel of the LCD.
pin
Standard PC
pin
graphics board
pin
Macintosh G3
pin
(Blue & White)
D-Sub 15
Macintosh
pin
Macintosh Adapter DSCR-153 (optional)
2
1