Eizo FlexScan L660 User Manual page 23

(5) "Phase" Adjustment
(6) Position Adjusment
Function
Eliminates the horizontal bars of distortion.
a) Select the "Phase" icon and push the Enter
button to show the "Phase" menu.
b) If horizontal bars appear, these can be eliminated
by adjusting the right and left buttons.
c) After finishing the adjustment, push the Enter
button to memorize the settings and return to the
"Screen" menu.
· "Phase" adjustments should be done after
adjusting the "Clock".
· Horizontal bars may not completely disappear
from the screen depending on the PC.
· The phase adjustment decides the sampling point
for converting the analog input signal to a digital
signal. Adjusting the "Phase" after the "Clock"
adjustment will produce a clear screen.
Function
Controls the screen position.
a) Select the "Position" icon and push the Enter
button to enter the "Position menu. Adjustment
markers are displayed on each corner of the screen.
b) Adjust the position of the upper left corner of the
image using the Control buttons in order to align
the screen.
· If vertical bars of distortion appear after finishing
the "Position" adjustment, return to "Clock" menu
and repeat the previously explained adjustment
procedure ("Clock" "Phase" "Position").
2 USING THE SCREENMANAGER
E
23