Making Use Of Usb; Setup Procedure; Required System Environment - Eizo FlexScan L660 User Manual

3 MAKING USE OF USB

-For USB Compliant System Environments-
This monitor provides a hub which supports the USB standard. When
connecting to a USB compliant PC or another hub, the monitor functions as
a hub to which the USB compliant peripherals can be easily connected.

Required system environment

• PC equipped with USB ports or another USB hub connected to the USB
compliant PC
• Windows 98/2000 // Mac OS 8.5.1 or later
• USB cable (Sold separately)
• The USB hub function may not work properly depending on the PC, OS
or peripherals. Please consult the manufacturer of each device about
the USB support.
• When the monitor is not on, the peripherals connected to the down-
stream ports will not operate.
• Even if the monitor is in a power saving mode, the devices connected to
the monitor's USB ports (both the upstream and the downstream) will
function.
Connecting to the USB HUB
• Do not connect the downstream port of the monitor to any peripherals
until finishing the USB function.
• The followings are procedures for the Windows 98 Second Edition/2000
and Mac OS.
1) Connect the monitor to the PC with the signal cable (See page 11) first,
then turn on the PC.
2) Connect the upstream port of the monitor to the downstream port of the
USB compliant PC or another hub by using the USB cable .
To Downstream Ports
of the PC or Another
Hub
After connectiong the USB cable, the USB function can be set up
automatically.
34
3 MAKING USE OF USB
Up-
stream
Ports Upstream Port:
Connect the USB compliant
PC or another hub using the
USB cable.
Upstream connector