Eizo FlexScan L660 User Manual page 21

Procedure
Please adjust the screen using the following procedure.
(1) Having read the "readme.txt" file, install and run the "Screen
Adjustment Program" in the utility disk.
Step by step adjustment is provided by the wizard guide. Follow the
wizard or the procedures (2) to (8) below.
• If the user's operation system has no utility disk (e.g. OS/2), we
recommend setting the desktop pattern to that as shown in the
diagram below.
(2) Auto Adjustment
Push the Auto adjustment button on the front panel. The following
message will appear and remain on the screen for 5 seconds. While
the message is on the screen, push the button again to automatically
adjust the screen position. If you do not wish to do adjust the screen,
do not push the button again. The message will disappear.
• The Auto adjustment function is intended for use on Macintosh and
PCs running Windows. It may not function properly if any of the
following applies:
• PC running MS-DOS (not Windows).
• The background color for the "wallpaper" or "desktop" pattern is
set to black or dark.
• Some signals from some graphics boards may not function
properly. Follow the adjustment procedure next page.
• During the Auto adjustment, some icons (e.g. clock icon) appear
on the screen continuously.
(Example)
Every-other-dot pattern
2 USING THE SCREENMANAGER
E
21