Konica Minolta bizhub C220 User Manual page 289

13.1 Configuring initial settings for the printer function
Item
[Banner Sheet Setting]
[Banner Sheet Paper
Tray]
[No Matching Paper in
Tray Setting]
[A4/A3<->LTR/LGR
Auto Switch]
[Binding Direction Ad-
justment]
[Line Width Adjust-
ment]
[Gray Background Text
Correction]
bizhub C360/C280/C220
Description
Select whether to print banner sheets for each print job.
Printing banner sheets prevent mixing different printing materials.
Select the primary paper tray for printing banner sheets.
Select the operation to be taken when there is no appropriate sized paper in
the specified paper tray.
Select [Switch Trays (Tray Priority)] to supply paper from a different paper tray.
Select [Stop Printing (Tray Fixed)] to stop printing and display a warning mes-
sage.
Converts between inch and metric units.
Select whether to print an A4 (Letter)/A3 (Ledger)-sized original by full size
when a paper tray containing Letter (A4)/Ledger (A3)-sized paper is selected.
Selecting [ON] forces full size printing, which may cause images be defective.
Select the binding position adjustment method used for 2-sided printing.
To adjust the line width so as to make thin lines and small letters easier to see,
select the line breadth.
To adjust the line width in gray scale background so as to make thin lines and
small letters easier to see, select [ON].
Selecting [OFF] applies the [Line Width Adjustment] setting in gray scale back-
ground.
13
13-3