Connect The Power Cord - Brother DCP-375CW Quick Setup Manual

g
Close the output paper tray cover a.
h
Slowly push the paper tray completely into the
machine.
i
While holding the paper tray in place, pull out
the paper support
unfold the paper support flap b.
1
until it clicks, and then
a
2
1
3

Connect the power cord

IMPORTANT
DO NOT connect the USB cable yet (if you are
using a USB cable).
a
Connect the power cord.
Note
The Warning LED on the control panel will stay on
until you have installed the ink cartridges.
3