Instantly Available Pc Technology; Resume On Ring; Wake From Usb - Intel BOXD915GEV - LGA775 800FSB 4DDR2 Aud+Vdo SATA ATX 4PCI Manual

Magic Packet* frame, the LAN subsystem asserts a wake-up signal that powers up the computer.
Depending on the LAN implementation, the boards support LAN wake capabilities with ACPI in
the following ways:
•
The PCI Express WAKE# signal
•
The PCI Conventional bus PME# signal for PCI 2.2 compliant LAN designs
•
The onboard LAN subsystem
1.12.2.4

Instantly Available PC Technology

CAUTION
For Instantly Available PC technology, the +5 V standby line for the power supply must be
capable of providing adequate +5 V standby current. Failure to provide adequate standby current
when implementing Instantly Available PC technology can damage the power supply.
Instantly Available PC technology enables the boards to enter the ACPI S3 (Suspend-to-RAM)
sleep-state. While in the S3 sleep-state, the computer will appear to be off (the power supply is
off, and the front panel LED is amber if dual colored, or off if single colored.) When signaled by a
wake-up device or event, the system quickly returns to its last known wake state. Table 9 on
page 39 lists the devices and events that can wake the computer from the S3 state.
The boards support the PCI Bus Power Management Interface Specification. Add-in boards that
also support this specification can participate in power management and can be used to wake the
computer.
The use of Instantly Available PC technology requires operating system support and PCI 2.2
compliant add-in cards, PCI Express add-in cards, and drivers.
1.12.2.5

Resume on Ring

The operation of Resume on Ring can be summarized as follows:
•
Resumes operation from ACPI S1 or S3 states
•
Detects incoming call similarly for external and internal modems
•
Requires modem interrupt be unmasked for correct operation
1.12.2.6

Wake from USB

USB bus activity wakes the computer from ACPI S1 or S3 states.

NOTE
Wake from USB requires the use of a USB peripheral that supports Wake from USB.
1.12.2.7 Wake from PS/2 Devices
PS/2 device activity wakes the computer from an ACPI S1 or S3 state.
1.12.2.8 PME# Signal Wake-up Support
When the PME# signal on the PCI Conventional bus is asserted, the computer wakes from an
ACPI S1, S3, S4, or S5 state (with Wake on PME enabled in BIOS).
Product Description
41