1.9 Audio Subsystem
The boards support the Intel High Definition audio subsystem based on the Realtek ALC860
codec. The audio subsystem supports the following features:
•
Advanced jack sense (front and rear panel) that enables the audio codec to recognize the
device that is connected to an audio port. All jacks are capable of retasking according to user's
definition, or can be automatically switched depending on the recognized device type.
•
Stereo input and output for all jacks.
•
A signal-to-noise (S/N) ratio of 90 dB.
INTEGRATOR'S NOTE
For the front panel jack sensing and automatic retasking feature to function, a front panel
daughter card that is designed for Intel High Definition Audio must be used. Otherwise, an AC '97
style audio front panel connector will be assumed and the Line Out and Mic In functions will be
permanent.
1.9.1 Audio Subsystem Software
Audio software and drivers are available from Intel's World Wide Web site.
For information about
Obtaining audio software and drivers
1.9.2 Audio Connectors
The boards contain audio connector on both the back panel and the component side of the board.
The component-side audio connectors include the following:
•
Front panel audio (a 2 x 5-pin connector that provides mic in and line out signals for front
panel audio connectors)
•
ATAPI CD-ROM (an optional 1 x 4-pin ATAPI-style connector for connecting an internal
ATAPI CD-ROM drive to the audio mixer)
•
S/PDIF (an optional 1 x 3 connector that provides S/PDIF output signals)
The functions of the back panel audio connectors are dependent on which subsystem is present.
For information about
The location of the front panel audio connector, the optional ATAPI CD-ROM
connector, and the optional S/PDIF connector.
The signal names of the front panel audio connector
The signal names of the optional ATAPI CD-ROM connector
The signal names of the optional S/PDIF connector
Product Description
Refer to
Section 1.3, page 17
Refer to
Figure 17, page 62
Table 20, page 64
Table 19, page 64
Table 18, page 64
29
Need help?
Do you have a question about the BOXD915GEV - LGA775 800FSB 4DDR2 Aud+Vdo SATA ATX 4PCI and is the answer not in the manual?
Questions and answers