Lan Subsystem; 10/100 Mbits/Sec Lan Subsystem; Lan Connector Led Locations - Intel BOXD915GEV - LGA775 800FSB 4DDR2 Aud+Vdo SATA ATX 4PCI Manual

1.10 LAN Subsystem

The LAN subsystem consists of the following:
•
Physical layer interface device. As a manufacturing option, the board includes one of the
following Platform LAN Connect (PLC) devices:
®
Intel 82562EZ PLC for 10/100 Mbits/sec Ethernet LAN connectivity
Marvell Yukon 88E50 for Gigabit (10/100/1000 Mbits/sec) Ethernet LAN connectivity
•
RJ-45 LAN connector with integrated status LEDs
Additional features of the LAN subsystem include:
•
CSMA/CD protocol engine
•
LAN connect interface that supports the 82562EZ
•
PCI Conventional bus power management
Supports ACPI technology
Supports LAN wake capabilities

1.10.1 10/100 Mbits/sec LAN Subsystem

The 10/100 Mbits/sec LAN subsystem includes the ICH6, the Intel 82562EZ PLC, and an RJ-45
LAN connector with integrated status LEDs.
®
1.10.1.1 Intel 82562EZ Physical Layer Interface Device
The Intel 82562EZ provides the following functions:
•
Basic 10/100 Ethernet LAN connectivity
•
Full device driver compatibility
•
Programmable transit threshold
•
Configuration EEPROM that contains the MAC address
1.10.1.2 RJ-45 LAN Connector with Integrated LEDs
Two LEDs are built into the RJ-45 LAN connector (shown in Figure 11 below).
Green LED
Figure 11. LAN Connector LED Locations
Product Description
Yellow LED
OM15076
31