Tools; Positioning; Navigator; Navigation View - Nokia E70 User Manual

13.

Tools

Select Menu > Tools.
The Tools folder contains applications used to configure your device and to configure other applications.
Memory card—See "Memory card," p. 16.
Transfer—See "Transfer content between devices," p. 17.
Profiles—See "Profiles," p. 92.
Settings—See "Settings," p. 71.

Positioning

With the positioning service you can receive information from service providers about local issues such as weather or traffic
conditions, based on the location of your device (network service).
Select Menu Tools > Positioning.
>
To select a positioning method, scroll to the positioning method, and select
Disable. The Bluetooth positioning method enables you to use Bluetooth GPS enhancements for positioning. The
based positioning method is provided by your network operator or service provider. Both positioning methods can be used
simultaneously.

Navigator

This feature is not designed to support positioning requests for related calls. Contact your service provider for more information
about how your phone complies with government regulations on location based emergency calling services.
GPS should not be used for precise location measurement, and you should never rely solely on location data from the GPS receiver.
Select Menu Tools > Navigator.
>
Navigator is a GPS application that enables you to view your current location, find your way to a desired location, and track
distance. The application requires a Bluetooth GPS accessory to operate. You must also have Bluetooth GPS positioning method
enabled in Menu Tools
>
The application must receive positioning info from at least three satellites to use it as a traveling aid.
The application requires a Bluetooth GPS accessory to operate.
Select from the following:
about your current location.
your average and maximum speeds.

Navigation view

The navigation view guides you to your trip destination. The cardinal points are indicated by letters on the circle, and the general
direction to your destination by a deeper color.
Select from the following:
latitude and longitude coordinates.
position as a location or landmark.
necessary for navigation.

Position view

View positioning info such as the latitude and longitude coordinates and altitude of your current location. You can also see the
accuracy of this info.
Select from the following:
strength of the satellites that provide the positioning info necessary for navigation.
temporarily saved in your device to help in navigation.

Trip distance view

The trip meter calculates the travelled distance and time and your average and maximum traveling speeds.
Select from the following:
display. Resume Continue using the trip meter.
them from the start. Clear
location or landmark. Satellite status
navigation. Saved locations
Copyright © 2006 Nokia. All Rights Reserved.
> Positioning.
Navigator View navigating information to your trip destination.
Trip dist. View your traveling information such as the distance and duration you have traveled and
Set destination Select a landmark or location as the destination of your trip, or enter the destination
Stop navigation
Satellite status
Saved locations View the locations you have temporarily saved in your device to help in navigation.
Save position Save your current position as a location or landmark.
Start Activate the trip meter.
Reset
Empty the trip meter values after stopping its use.
View the signal strength of the satellites that provide the positioning info necessary for
View the locations you have temporarily saved in your device to help in navigation.
Delete the destination set for your trip.
View the signal strength of the satellites that provide the positioning info
Stop End using the trip meter. The values calculated by it remain on the
Set the values calculated by the trip meter to zero and start recalculating
81
Options > Enable. To stop using it, select
Position View positioning information
Save position
Satellite status
Saved locations View the locations you have
Save position Save your current position as a
Options
>
Network
Save your current
View the signal